Effect of Extraction Time on the Yield, Chemical Composition, and Antibacterial Activity of Hop Essential Oil Against Lactic Acid Bacteria (Lactobacillus brevis and Lactobacillus casei) Beer Spoilage.

Hop essential oil (EO) generates interest for its antioxidant and antimicrobial properties, in addition to the volatile compounds that are responsible for the hop aroma in beer. Thus, the objective of this study was to evaluate the chemical composition, EO yield, and antibacterial activity of hop essential oil from hops of the Chinook variety against lactic acid bacteria (Lactobacillus brevis and Lactobacillus casei) at different times of extraction. EO extraction was performed by hydrodistillation at different times. By analyzing the chemical composition by gas chromatography and mass spectrometry, the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) were determined. The major compounds of hop EO were α-humulene, ß-myrcene, and ß-caryophyllene, and the extraction yields were 0.67, 0.78, and 0.85% mass of EO per mass of hops pelletized hops (m/m), for extractions of 90, 180, and 300 min, respectively. The EO obtained in 90 min was efficient against L. casei at 2.5 mg/mL (MIC) and 5.0 mg/mL (MBC), and the 300 min one against L. brevis at 2.5 mg/mL (MIC) and 25 mg/mL (MBC). The antibacterial activity was affected by the chemical makeup of the oil, revealing that the hop EO extracted in 300 min was the most efficient among the other extraction times.

Extraction of hops pelletized (Humulus lupulus) with subcritical CO2 and hydrodistillation: Chemical composition identification, kinetic model, and evaluation of antioxidant and antimicrobial activity.

Hop essential oil and hop extract using carbon dioxide (CO2) are products with high added value because they have bioactive and sensory properties. In this context, the objective of this study was to obtain and characterize essential oil and extracts from pelleted hops of El Dorado, Polaris, Hallertau Blanc and Callista varieties using hydrodistillation and subcritical CO2 extraction methods. Extraction yield ranged from 0.38 % to 1.97 % (m/m) for essential oils and from 8.76 % to 15.35 % (m/m) for extracts using subcritical CO2. The chemical compositions of the essential oils were mainly monoterpene (18.14 % to 29.91 %) and sesquiterpene (46.01 % to 59.03 %) hydrocarbons and for the extracts were sesquiterpene hydrocarbons (33.05 % to 71.90 %) and oxygenated sesquiterpenes (14.80 % to 34.89 %). The extracts showed better antioxidant activity than essential oils due to the presence of phenolic compounds and flavonoids. Hop extracts showed some antimicrobial activity, but essential oils did not demonstrate antimicrobial potential. Hop extracts obtained with subCO2 have the potential to be used in the brewing industry as a flavoring and as natural antioxidants.

Chitosan and chitosan/PEG nanoparticles loaded with indole-3-carbinol: Characterization, computational study and potential effect on human bladder cancer cells.

Indole-3-carbinol (I3C) is a plant molecule known to be active against several types of cancer, but some chemical characteristics limit its clinical applications. In order to overcome these limitations, polymeric nanoparticles can be used as carrier systems for targeted delivery of I3C. In this study, chitosan and chitosan/polyethylene glycol nanoparticles (CS NP and CS/PEG NP, respectively) were prepared to encapsulate I3C by ionic gelation method. The polymeric nanoparticles were characterized by Dynamic Scattering Light (DLS), Zeta Potential (ZP), Fourier Transform Infrared (FTIR) spetroscopy, X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Field Emission Gun Scanning Electron Microscopy (FEG-SEM). I3C release testing was performed at an acidic media and the interactions between I3C and chitosan or PEG were evaluated by Density Functional Theory (DFT). Cytotoxicity of nanoparticles in bladder cancer T24 cell line was evaluated by the Methyl-thiazolyl-tetrazolium (MTT) colorimetric assay. The average size of the nanoparticles was observed to be in the range from 133.3 ± 3.7 nm to 180.4 ± 2.7 nm with a relatively homogeneous distribution. Samples had relatively high positive zeta potential values (between +20.3 ± 0.5 mV and + 24.3 ± 0.5 mV). Similar encapsulation efficiencies (about 80%) for both nanoparticles were obtained. Physicochemical and thermal characterizations pointed to the encapsulation of I3c. electron microscopy showed spherical particles with smooth or ragged surface characteristics, depending on the presence of PEG. The mathematical fitting of the release profile demonstrated that I3C-CS NP followed the Higuchi model whereas I3C-CS/PEG NP the Korsmeyer-Peppas model. Chemical differences between the nanoparticles as based on the I3C/CS or I3C/PEG interactions were demonstrate by computational characterization. The assessment of cell viability by the MTT test showed that the presence of both free I3C and I3C-loaded nanoparticles lead to statistically significant reduction in T24 cells viability in the concentrations from 500 to 2000 µM, when comparison to the control group after 24 h of exposure. Thus, CS and CS/PEG nanoparticles present as feasible I3C carrier systems for cancer therapy.

Biological properties of functional flavoring produced by enzymatic esterification of citronellol and geraniol present in Cymbopogon winterianus essential oil.

The chemical composition and biological properties of citronella essential oil were modified by enzymatic esterification reaction of the major monoterpenic alcohols with cinnamic acid. The almost complete conversion of geraniol and citronellol present in the citronella (Cymbopogon winterianus) essential oil, into geranyl (99%) and citronellyl (98%) cinnamates was obtained after 48 hours of reaction using a molar ratio of 3:1 (cinnamic acid/alcohol), lipase concentration (Novozym 435) of 15% (w/w) and 70 °C. The esterified oil showed higher antimicrobial activity against Staphylococcus aureus bacteria resistant to oxacillin and penicillin and also greater larvicidal activity against Aedes aegypti larvae compared to unesterified oil. The results concerning the evaluation of toxicity against Artemia salina and cytotoxicity against monkey kidney epithelial cells also showed the superiority of the esterified oil.

Extraction and characterization of phytochemical compounds from araçazeiro (Psidium cattleianum) leaf: Putative antioxidant and antimicrobial properties.

Underexplored species have phytochemical potential for pharmacological and nutraceutical applications. The fruits of such species, including aracá (Psidium cattleianum Sabine), are rich in specialized metabolites with putative antioxidant and antimicrobial activity; therefore, the leaves of these species are also a potential source of bioactive compounds. In this study, araçazeiro leaves were extracted using an aqueous infusion (Al) and a pressurized liquid extraction system with water (PLE-W), ethanol (PLE-E), and 1:1 water:ethanol ratio combination (PLE-W:E). PLE-W:E yielded a greater diversity of extracted compounds. Nonetheless, all extracts showed inhibitory activity against pathogenic Gram-positive and Gram-negative bacteria and antioxidant activity in the in vitro thiobarbituric acid reactive substances (TBARS) and reactive oxygen species (ROS) assays with rat brain and yeast model systems. Thus, araçazeiro leaves can be exploited as a promising source of bioactive compounds.

Newly Isolated Penicillium sp. for Cellulolytic Enzyme Production in Soybean Hull Residue

Abstract (1) Background: The aim of this study was to evaluate the production and partial characterization of xylanase and avicelase by a newly isolated Penicillium sp. in solid-state fermentation, using soybean hulls as substrate. (2) Methods: Temperature, time, number of spores, and substrate moisture on xylanase and avicelase bioproduction were evaluated, maximizing activity with 30°C, 1x106 spores/g substrate, 14 and 7 days of fermentation with 70 and 76% substrate moisture contents, for xylanase and avicelase, respectively. (3) Results: Different solvents, temperatures, and agitation in the enzymatic extraction were evaluated, obtaining higher activities, 430.77 and 26.77 U/g for xylanase and avicelase using 30 min extraction and 0.05 M citrate buffer solution (pH 4.5 ), respectively at 60°C and 175 rpm and 50°C and 125 rpm. The optimum pH and temperature for enzymatic activity determination were 5.3 and 50°C. Enzyme extract stability was evaluated, obtaining higher stability with pH between 4.5 and 5.5, higher temperature of up to 40°C. The kinetic thermal denaturation (Kd), half-life time, D-value, and Z-value were similar for both enzymes. The xylanase Ed value (89.1 kJ/mol) was slightly lower than the avicelase one (96.7 kJ/mol), indicating higher thermostability for avicelase. (4) Conclusion: In this way, the production of cellulases using alternative substrates is a way to reduce production costs, since they represent about 10% of the world demand of enzymes, with application in animal feed processing, food production and breweries, textile processing, detergent and laundry production, pulp manufacturing and the production of biofuels.